The 3 S’s: Stargrave, Space: 1999 and Serenity

Andy tells a story of repurposing an Eagle…

With the announcement of the release of Stargrave last year one of our members suggested that as a lockdown project those interested might like to kitbash or scratchbuild a shuttle or spaceship and paint up a 15mm crew for the game, with a target date of early 2021 when we hoped we might be able to resume meetings. The due date was of course extended.

A long time ago in a galaxy far, far away…

Actually, no, it was in the 1970’s in Rochester, I bought and made up an Airfix Space 1999 Eagle Transporter. Said model has followed me around various student lodgings, digs, flats and finally my current home.

So, I had a search in the loft and found the Eagle. It’s not had very much use, but at one point I completely repainted it into a non-cannon scheme.

Eagle as found

I noticed that the thruster units were missing, I have a vague recollection that I removed them for the last repaint, and put them in a ziplock bag somewhere. Exactly where I don’t recall, hopefully they will turn up at some point.

Having found the model I decided I didn’t want to do a full strip and repaint, but I wasn’t that keen on the colour scheme I had used for the doors on the cargo pod or cockpit.

I decided to just touch up the grey and repaint the cargo pod and cockpit panels. I started off by giving the doors and the cockpit panels a couple of coats of Foundation White. Once dry I then repainted the doors and panels with Fluorescent Orange, with some black lining. The instrument panels at the top of the doors were painted Gunmetal Grey.

I also decided that the main engine nozzles need a touch-up, matt black inside and Gunmetal Grey outside. I also repainted the black panels on the cockpit section. I suspect my decision to use a grey and orange scheme may have been influenced by old Royal Navy SAR helicopters.

I had a rummage through my spare transfer box and found quite a few sheets from some Hasegawa 1:72nd scalexe UH-1D Helicopters I’d built for Vietnam games. This gave me a load of duplicate registration numbers, plus some Japanese Kanji characters. I gloss varnished the areas I to which I was going to place the transfers, added some 5-digit numbers to the front and sides, and larger two-digit numbers to the sides and top surfaces. I also added a Kanji block to the sides of the cargo pod, these actually read Rikujōjieitai or “Japan Ground Self Defence Force”. The reasons for adding some Kanji characters will become clearer later.

Eagle repainted

While I was working on the Eagle and posting WIP pictures on the MWS groups.io discussion page a debate arose about whether I should give the Eagle some weapons. There were arguments in favour and against, some of which were quite passionate.

I decided to try and have the best of both worlds, and make the guns detachable. Looking at the Eagle the spinal lattice work had gaps of approximately one inch. I thought I could make some inserts to fit this lattice to hold the guns.

I started by cutting some 25mm square sections of 5mm foamboard, then trimming about 2 mm off each edge of one of the cardboard faces and the underlying foam. This needs to be done carefully so as not to cut through the second face. This results in a roughly 21mm square “plug” with a 25mm square upper face. I made two of these.

Left to right: 25mm square foamboard, markings for the edge cuts, the roughly 21mm square plug with 25mm upper face.

I obtained a selection of spare guns from Brigade’s 15mm Accessories range, and made two gun packs, one fixed gun firing forward using a Triple Powergun and one with four Remote Weapons Mounts, think of some small Vulcan Phalanx systems.

I painted the guns Gunmetal grey and the body of the pack as close a match to the Eagle’s grey as I could mix. I then gave the guns a liberal coat of Army Painter Dark Tone wash.

Eagle Guns (L to R) Chin gun from a Kirin walker, Triple Powergun, Remote Weapon Mount

These gun packs just push fit into the spinal lattice, the foam is flexible enough to deform as they fit into place and expand again to hold them solid. The separate twin turret just fits into a recess in the cockpit section.

Eagle guns mounted

Now onto the crew.

A while ago I was tempted by a couple of GZG figure packs that bore an uncanny resemblance to the cast of a certain 2000’s Sci Fi TV show and film. Shiny. So, these would become the crew of the Eagle.

I mounted these on some 16mm diameter washers, built up the bases with Polyfilla and undercoated them with grey primer.

I found a few pictures of the cast on the web and used those as inspiration for the colour scheme, or as close as I could get with the mostly Valljeo paints I had available. The bases were then finished off with basetex and the figures varnished.

Three of the cast had duplicate figures, either different clothing and / or weapons, so I painted the second version in slightly different colours so that they could be used as different characters if required.

Left to right: two versions each of the Captain, Enforcer and First Mate.

The other six members of the crew only had a single casting each:

Left to right: Telepathic teenage ninja girl and her brother the Doctor; Pilot (husband of the First Mate), Engineer, Shepherd (sort of a priest) and Courtesan.

Oh, and the use of the Kanji script on the Eagle? In the TV show the characters speak a mixture of American English and Mandarin (the latter usually mild profanities) and the latter also appears in company names and logos, the Kanji decals were the closest I had to Mandarin.

I originally thought that the Airfix kit was 1:72nd scale, but if so, the crew would have to be contortionists to fit in the cockpit.

Off to Google. There’s quite a few websites dedicated to Space: 1999. I found one website that states that the Eagle is 76 feet (23.16m) long which, given the model length of 300mm nose to engine nozzles, would make the kit  approximately 1:77th scale; another  compares the Airfix kit to the different Eagle models used in the TV series, which were not necessarily consistent with each other.

This suggests that the Airfix model is likely to be closer to 1:96th scale. I could probably start some arguments if I started making pronouncements that 15mm = 1:100 scale (personally I reckon it’s closer to 1:120), but the bottom line is I think that the Eagle looks OK next to 15mm figures, and the crew could get into the cockpit without scraping their heads on the ceiling.

Unarmed Eagle and crew

Wherever you have protagonists you need antagonists. As far as I could see GZG didn’t do any of the TV show’s “baddies”, the Alliance, so I went elsewhere.

Brigade models do some Uniformed Starship Crew and some Tank Crew in helmets. I got a pack of each. Unfortunately, the bases on these were too small to glue directly to the washers, so I had to cut some suitably sized cardboard fillers to bridge the gap. These figures got a generic mid grey uniform with some red and silver highlights here and there. Depending on your viewpoint these are the heroes of justice, or the lackeys of the oppressive state.

Alliance Officers: The Commander (2nd left) and her Lieutenants.
Alliance Grunts

These chaps don’t have a ship of their own, but I do have a vehicle, a Brigade Javelot scout car, for them.

Grunts and car

It might be a bit tight for all 8 of them in there, so I might need to get them more transport!