Having a Blast!

Jeremey takes us through some home made blast markers.

Having recently started repainting my old 6mm Sci-Fi forces my thoughts turned to the different types of blast markers used in various wargames, you know the ones, they are often made of hard translucent plastic in the shape of a flame. Wargamers use them for marking the spot they are calling artillery down on or even to show destroyed and burnt out vehicles.

The first thing I thought of was could I make my own? Having made many things out of EVA foam for my gaming I turned to that first as a very simple material to work with. I knew you could get the foam in thin sheets and in bright colours. As luck would have it I popped into a local Poundland store to pick up some things for a bit of DIY I had to do, and discovered in the crafts section a packet of foam rocket shapes.

The packet had 5 foam rockets shapes for each colour

So I bought a packet at the predictable price, thinking I could make blast markers out of the red and yellow rockets.

Blast marker templates cut from a piece of cardboard

I made myself two flame shaped templates out of cardboard. One smaller than the other and made sure the smaller one fitted inside the silhouette of the larger one.
It was then just a matter of drawing round the templates, trying to fit in as many of the markers as I could. To make 3 blaster markers I would need 3 of the bigger flames in red and 6 of the smaller yellow flames to go on either side.

The first cut out flames, bit short on the yellow bits though

of course at first I completely forgot I’d need twice as many of the smaller yellow flames as the red, which is why there are only 3 of each in the picture!

A smaller blast created during assembly

Rather than waste the foam I experimented with a smaller blast marker cutting out from the red foam using the smaller of the two templates I’d made. I used standard PVA glue to stick the yellow smaller flame to the red foam and then repeated the process for the other side of the marker.

Incoming!

The final (sort of) stage involved me supergluing the marker to a thin wooden base that I had, which I then just painted to blend in a bit better. There we have it, very cheap, simple and quick blast markers for games.

However as you can see from the picture I took it a stage further. I added or rather smudged on some black miniature paint in that way explosions are often depicted. Nice simple effect that stops the blast marker looking too cartoonish. I also turned to the blue foam from the packet and wondered if I could make a splash marker. I don’t often play naval wargames but fellow club members do. I cut out a more splash like shape and as with the black on the blast marker I dabbed white paint on the edges of both the main shape and the smaller splash shapes, and of course I painted the base blue.

Now all I need to do is think up a way of using the green foam from the packet. Hmmm alien weapon blast effect …