Author: Jeremey

Work in Progress Wednesday

The club slump after the holiday is definitely over, so much so that I’m going to save a few bits for next week.

First up John has finished the flour mill and we all agree he has done a wonderful job on the model. Considering John was following a very limited number of pictures. John has promised to do a step by step guide for a future blog post. But for now here is the completed mill.

This building is going to be an impossing sight on the tabletop

Next up Marcus has started on some new starships, Marcus told us “I put together some GZG “Crusty” starships. This is just a sample: 2 standard destroyers, a heavy destroyer on the right and an as yet unprimed conversion of a cruiser mated with the rear section of the heavy destroyer.”
Will be interesting to see what colour these go, I’m always facinated by the colours gamers chose for starship models.

A new fleet on the way

Tony has revied his flagging painting schedule to provide two offerings (saving the others for next week in case he flags again). The first being some more 6mm vehicles using Games Workshop contrast paints for the camoflague.

Spray undercoat of white, then an overall coat of Apothecary White followed by camouflage stripes of Militarum Green.

And to follow that some power pylons but I’ll let Tony describe the construction of these in his own words: “First up is this pair of Hornby power pylons. These are HO scale, about 8″ tall, and will serve for anything from 15mm Sci-fi to 20mm Gaslands or 28mm Zona Alfa.
They were pigs to put together – they’re quite old models and whoever designed them hadn’t heard of locating pins. Everything is butt joins or flat face-to-face joins, and it was very hard to get them all square and lined up properly. So much so that the first one I attempted to put together is currently being turned into a wrecked version, it was that bad…”

Apparently a challange to put together

And last but not least I finally managed to start slapping some paint on my last four 15mm Wars of the Roses units. I’m currently using the Sword and Spear rules and have the maximum number of standard units for an army so needed to look at the secondary units allowed.

Apart from the odd figure and commanders these are all from Essex Miniatures

The additional units will be one each of Welsh Longbowmen, Spearmen, Welsh Spearmen and Mercenary Crossbows.  As with the rest of my army I am specifically avoiding painting them all the same so I use one colour at a time and paint just one item on each figure before moving onto the next to get a real random feel to the unit.

That’s it for this week, join us again next week for more progress on these and other projects.

That’s a Nasty Habit

Club member Steve conducted a series series of polls on the club’s modelling and painting habits over the Christmas/New Year 2020.

QUESTION 1
What paints do you use?
100% said they used acrylics. No real big surprise there. Although one person did say he uses both acrylic and enamel (Dave – you crazy kid, you!).

QUESTION 2
What make of paints do you use?
A lot more variety here. The most popular were Vallejo with 24.4%. I was surprised by what came second – Tamiya, with 14.6%. I think Tamiya use some kind of oil medium, which is why they curdle and can be a challenge to paint miniatures with, though probably not so bad when it comes to vehicles and buildings and things with other large surfaces. GW came in third with 12.2%. Then Army Painter, Humbrol, and ‘artist’s acrylics’ with 9.8% each (I cannot believe Coat d’Arms wasn’t even on the list! JC).

QUESTION 3
Which colour do you find the hardest to shade and highlight?
I expected red to romp home with this. It didn’t though. The most popular answer was yellow, with 53.8%. I was surprised at that, because I find yellow one of the easiest. Second was a tie between red and black with 15.4% each, and then both white and metallic with 7.7% each.

QUESTION 4
Do you brush or spray varnish?
Spray on got 53.3% and brush on got 46.7%. Fairly even (some of us use both JC).

QUESTION 5
Which brushes do you use?
Mid-range brushes (Daler Rowney, etc) were most popular with 10.4%. A surprising 7.8% went with those dreadful cheap brushes from The Works – I’ve tried them and they lasted all of one painting session. 2.6% went with decent sable brushes (I recently bought a kaplinsky sable brush and it is an absolute gem). 3.9% treated themselves to a proper miniatures painting brush (not sure what that is, to be honest).

Brush care also came into it. 2.6% take proper care of our brushes, giving them a clean after each session. 5.2% give them a clean once in a blue moon. 3.9% are heartless and cold and take no care of their brushes and just throw them away when they’re no good.

11.7% said they use size 0 and 1 brushes for miniatures painting. 2.6% said they go up to size 2 or 3 (must be painting giants with brushes that size!).

9.1% confessed to putting their brushes in their mouths (come on, must be more than that, surely!). And 7.8% admitted to having put their brushes in a cup of tea accidentally.

QUESTION 6
What colour Undercoat?
Both black and white came out jointly on top – with 33.3% each. Grey was next, with 20%, then both brown and ‘other’ with 6.7% each.

QUESTION 7
Metal or plastic miniatures?
40% of us prefer the heft of metal on the battlefield. 26.7% use metal but have the odd plastic figure, and 26.7% don’t care whether it’s metal or plastic just so long as it’s cheap! This left 6.7% who use the Devil’s cocktail – plastic!

QUESTION 8
Do you make or buy terrain?
I get the feeling that MWS is quite a modelling-strong club so it would be interesting to see what our modelling habits were.

22.6% took the middle road – making what they can and buying what they can’t. Which is fair enough. 16.1% confessed to buying the horror that is MDF terrain – shame on them! Another 16.1% said they preferred resin terrain pieces. 12.9% said they buy terrain, whilst 9.7% said they always make and never buy. picture of model buildings3.2% decadent souls said they have more money than sense and pay others to make it for them! 6.5% of us said that making terrain was one of the most enjoyable aspects of the hobby. Which it is. And a disappointing 9.7% admitted to being so bad at terrain making that even MW’s Wargames Widow was inspiring. Can things be that bad? (In Steve’s opinion JC).

So there we go – a review of the club’s modelling and painting habits. I’ll leave you to draw whatever conclusions you want from the results. Let us know how your habits agree or differ with those of the club because it’ll be interesting to see how representative we are with the hobby as a whole.

Maybe someone else can run a series of polls on our gaming habits

Work in Progress Wednesday

After taking last week off, club members have struggled out of the holiday slump with details of what they have been working on (there’s actually a lot going on but the club members are being hopeless at taking pictures!)

First up Marcus’ son has been trying a bit of miniature painting. We think these sci-fi troopers are a very good start.

Next up Marcus is going to teach a bit of dry brushing

Then Sean surprised us with pictures of his 6mm Viking raiders. These most definitely look the part, even more so when we learnt the ships are actually paper models.

Vikings on Tour!

And lastly for this week, I’ve done some more work on the pieces of plasterboard I acquired (ahem) with a wash of black paint to give that real ruined look.

First of the painted ruin pieces

Hopefully the club will continue coming up with projects in 2021.

 

Every Cloud …

Jeremey gets plastered (it had to be done, AK)…

Sometimes I do worry about us miniature wargamers. Faced with the challenges of everyday life, their outlook can be slightly different to the non-hobbyist.

Recently there was a crashing sound and on investigation the utility room ceiling was no more. There were plaster board fragments everywhere. Dealing with reality first I cleaned the area up and started looking for someone to repair the damage.

Remains of the Ceiling and Collected Detritus

Not the sort of expense I wanted (but quite fitting given how 2020 was), however during the clean up operation I kept picking up bits of rubble and thinking how the chunks of plaster reminded me of concrete.

Proof of Concept

Before you could say “how much!” to the plasterer, I’d put together a proof of concept to turn the plaster fragments, into rubble for my 28mm troopers to fight over.

But I paused at this point when someone pointed out that old plasterboard could contain Asbestos! Well regardless of using the plasterboard for scenery I still had to tidy up my utility room. So I sent a sample off to be tested which came back as negative. So please do be cautious if you’re thinking of doing a similar project as this.

The plaster board rubble was very weak and dusty so I used a genuine DIY tip and painted the plaster with a watered down PVA glue solution to seal it. This made the plaster more like concrete and stopped it from crumbling while being handled.

Glue Gun to Stick it Together then more PVA

A lot of the rubble still had all the layers attached to it which I left in place to make it even more authentic looking. In the pictures I’ve done nothing but glue the pieces together and coated everything in a second layer of PVA glue.

These pieces have become very solid and are still very light, as light as resin would be. As you can imagine I have quite a lot of material to work with and so will be returning to the blog with an update on building an entire destroyed settlement.

Framing my Childhood

Phil takes us down memory lane with his introduction to toy soldiers.

We’ve been feeling rather nostalgic here at the club recently – swapping stories of our early wargaming experiences and lamenting the numerous model and toy soldier shops that have fallen by the wayside.
Many of our tales seem to start with the phrase “I had a lot of Airfix soldiers when I was a child” and I was certainly no exception to this. I had loads of them – WW1, WW2, Cowboys, Indians and ACW. The HO/OO Assault sets and the 1/32 Combat Packs with the firing pillboxes.
But it is the four boxes of 1/32 Napoleonic soldiers that stand out from the rest for a couple of reasons.

Firstly, they were all painted. I was given them for my 8th or 9th birthday but before then my mother had spent hours painting them. They were all lined up on the dining table waiting for when I woke up that day.
Second, I kept the boxes. I’m not sure if it was a conscious decision, but I do remember from an early age being impressed with the artwork on them – probably the best toy soldier boxes ever designed. They’re a bit dog-eared, paint marked and have a few other dubious stains, but they all managed to survive for well over forty years.
A house move last year suddenly presented me with a lot more wall space for hanging pictures. So, I decided to dig out the boxes and give them a better life than languishing in the loft. A quick trip to my local picture framing shop and they now have pride of place on my dining room wall. A permanent reminder of those halcyon days.

And the little chaps themselves? They are still here – battered and missing paint but still ready to serve king or emperor as appropriate.

Work in Progress Wednesday

During this holiday period we still have a bit of progress being made by club members.

John continues building up his Zona Alpha city with some more progress on the warehouse.

A roof and windows next for the warehouse

But John has also teased us with the beginning of construction on a mill/ironworks.

The beginning of the iron works

Feeling like I should also be making stuff, I’ve turned to that icon of art and crafts, the egg box.

Finally doing something with an egg box

Despite looking like some sort of sci-fi power station I’ve never bothered to use egg boxes for fear that on the tabletop they still look like egg boxes. But having used this one over the holiday period I felt I should see what I can do. It was a box of 15 eggs so avoids the dozen/half dozen look. But lets see what I can do with it.

And finally Steve has almost finished his new Dwarven army most likely to be used with the Dragon Rampant rules.

Just a couple of units to go

That’s it for 2020’s WIP Wednesdays. Let’s see what 2021 projects the club members can come up with.

Work in Progress Wednesday

This week Steve puts us all to shame with his continued hobby output.

First up he has already finished painting up his dwarves and heavy support in the form of a giant bear.

He’s behind you!

And out of the blue he has also found time to make himself a neat dice box. Bought for just £2 from the shop ‘The Works’, Steve created some compartments and a tray insert.

You can never have enough dice.

Next up John’s Zona Alfa city continues to expand with the start of a new warehouse. I’m sure this will look as good as the previous office block.

A warehouse for the Zona Alfa city

And finally I’ve started the plastering stage for my 15mm Tudor style buildings for Wars of the Roses games. As per my normal method they are made from EVA foam with the wood beams cut from coffee stirrers.

Tudor buildings soon to echo with the clash of swords and arrows

I thought I’d go for bathroom sealant to plaster in between the beams but it’s a nightmare so will need a rethink as I have seven buildings to do.

Given the current lockdown status we may well have another WIP post next week.

 

Work in Progress Wednesday

The club is definitely slowing down production as we approach the Christmas Holidays. And quite right given this year, although I suspect a few hobby related presents might see a resurgence in the new year.

First up Mark has made more progress with his Panzers.

More panzers get the camouflage treatment

And out of the blue mark also mentioned starting to slap some paint on a hundred years war project.

The English start to assemble

Steve shared this picture of a dwarven force on the painting table, but there was no mention of last weeks 6mm sci-fi force. After saying he had nothing to paint it seems Steve is queuing the projects up.

New Dwarvern Force on the Way

Steve got these Dwarves from Conqueror Models.

Meanwhile I’ve been busy using some old rock style clay I had for rubble piles. After using the hot glue gun to stick them together I coated the whole thing with PVA glue.

Air Drying Clay, left to dry and broken up for industrial style rubble

I’ve also resurrected my old 10mm dungeon to finally finish the project.

One half of the 10mm Dungeon

Slightly embarrassing that this project was started 17 years ago! Still made some progress at last.

Petrified Forest

Jeremey adds more ‘real’ trees to make a Petrified Forest.

After building my large spooky dead tree , well I say building but it was more like nature built it and I just based it. I also took a dozen or so other cuttings from the dead bush to use as trees in a Dead or Petrified Forest.

Additional dead branches to act as trees

I started by basing these in exactly the same way as the large tree I did. A round wooden base appropriate to the size of the stick with a metal washer stuck on top to provide some weight. I’ve started to add weight to a lot of my terrain projects. It helps to stop taller pieces from being constantly knocked over during games.

Using the hot glue gun I then stuck a piece of the dead bush to each base and covered the whole base with the coloured bathroom sealant mix. If you saw my other post about the large tree you will remember I mixed far too much of the sealant, so it was useful to have these additional trees to base.

Just a bit of dry brushing and some flock

Once the base material had dried I dry brushed it with two other lighter brown colours to give some contrast. While I had the paint brushes out I also used a watered down solution of brown ink wash to go over all the freshly snapped of parts to make the wood look like it had been broken for a long while. The appearance of fresh sap wood is a dead give away, just ask any experienced tracker … ahem I then added a bit of flock and a few grass tuffs for good measure.

The cheapest dead forest you will see this year

Here is a wider shot of the whole forest complete with a unit on patrol. I’ve put them on my lighter desert mat but they go just as well on the grass one and I have some darker brown mat pieces to put the trees on to define an area of forest in games. Although I will also put these on my swamp mat as they look just the part for those areas you see in fantasy films were rising water as killed the trees, sort of the forest of doom or swamp of despair.

Work in Progress Wednesday

It was troopers and gaming aids for this Wednesday.

Steve finally managed to get around to rebasing some troopers, as Steve himself says “A while ago I decided to strip and re-paint some EM4 plastic colonial marines. I also cut away the old guns and bought some replacements.

EM4 Plastic Troopers with Weapon Swaps

John L has also been painting troopers in the form of a group of Spetsnaz he actually won in a Zona Alfa competition.

Footsore America Spetsnaz

And finally this week Tony F has created for himself some stat trackers for Lord of the Rings.

Lord of the Rings Stat Trackers

Tony explains these far better than I could: “I’ve made some gaming aids for Lord of the Rings games; these are stats trackers to record the special abilities of heroes and commanders using small D6. The original was 3D printed and then I’ve made moulds and cast them up in resin. The lettering and army badges are raised to make them easy to paint. I’ve painted some in appropriate colours for each army, and I’ve painted the ‘W’ for Wounds in red to differentiate it from the ‘W’ for Will (the other stats are Might and Fate).”

It will be interesting to see how these work. Tony is still looking at how to add the heroes name to the tracker.