Gaslands Geezers

Andy gets out of his car and walks.

Many, many, many years ago I bought some Platoon 20 armed civilians and SAS style figures. I can’t now remember what I bought them for, and they’ve been a small part of my metal mountain for a very long time. This range has changed hands a few times, but are now available from East Riding Miniatures. You can find the armed civilians here, and the SAS here.

Last year I got into Gaslands, and thought these might be useful as vehicle crew or aggressive bystanders.

I based them on 1p coins, built up the bases with 4Ground base render and undercoated them black. Paints are mostly Vallejo, with Army Painter washes. All bases were painted Grey Black and bare skin Medium Flesh.

First up are three ne’er-do-wells (top) in boiler suits and stocking masks (hence the ill-defined faces) a woman armed with a pistol, and two chaps one with a sawn-off shotgun and the other with an Uzi (or similar). The masks and hands were painted Brown Sand, the boiler suits Dark Prussian Blue or German Field Grey and boots black. Guns were, surprisingly, Gunmetal.

Next are a woman and a couple of men with handguns. These guy on the left has a German Cam. Med Brown jacket, grey T shirt and black trousers. The woman in the middle has a Grey Jacket and Dark Prussian Blue trousers. These guy on the right has a German Camouflage Black Brown jacket, white shirt and Army Painter Crystal Blue trousers washed with Blue Tone wash.

Another three figures, the guy on the left has a M3 “Grease Gun” SMG, and maybe a Flak Jacket. The trousers were Army Painter Crystal Blue with a Blue wash, shirt white and the flak jacket Brown Violet (which is green, go figure!). The guy in the centre just has a hand gun. His shirt is pale sand, trousers London Grey and jacket German Camouflage Black Brown.
The guy on the right is not from Platoon 20, I suspect he may be some sort of Sci-Fi figure of unknown manufacture, but I’ll treat him as (mostly) human and armed with a pump action shotgun. He has German Cam. Med Brown overalls with a dark tone wash.

Finally, the two SAS figures. I went with a camouflage pattern here, German field Grey base, with Flat Green, Mahogany Brown and Chocolate Brown patches. The Helmet and Flak Jackets were painted Brown Violet and the gas mask case German Camouflage Beige.

The Irish Rover

Stephen goes all Celtic.

Under Saga 1 the Irish were just too over-powered.

I always thought they’d be a good warband to play but the gross nature of some of their javelin abilities left them too powerful and, to be honest, it wasn’t fun playing them for that reason.

The good news is that under Saga 2 the Irish have been seriously nerfed, meaning it’s not so embarrassing fielding an army of them.

So I’ve revisited my Irish and the intention is to use them more often now they are a balanced force.

Fergal mac Amlaith’s mother is an Irish noblewoman and his father is a Viking Jarl.

He was brought up on the shores of Lough Ceagh where he looked after his father’s dogs. This love of animals has lasted into his adult life and now he has a large kennel of his own.

Since taking over his father’s lands he has demanded the fianna bondsmen swear fealty to him. They have all, both local noblemen and norse colonists, agreed to do that. This means that Fergal has a good many hearthguard to protect him and these men are led by Connor and Rory, the tribal champions – the feared curaidh.

The land tenants make up the rest of Fergal’s force. These bonnachts are well trained in how to use their javelins and hatchets and are prepared to fight to the death for their lord.

Looking over everyone’s pastoral needs is Father Padraig. He is a very spiritual man, though he is worldly too – he knows enough to know that peace is sometimes best achieved by knocking a few heads together.

They have all now sharpened their spears and swords and are ready to go roving.

A Tents Moment

Andy proves that there are no depths to which his puns will not stoop.

I picked up a frame of Renedra Saxon Tents a couple of years ago, and finally got round to finishing them.

There’s very little assembly to do, the ends of the ridge pole are seperate pieces that needed a little filling once put together, and the open tents have an upright pole at one end.

These didn’t take too much effort, the tents were undercoated black, including the inside of the open tents; and then painted Vallejo Deck Tan, Light Grey or Dark Sand. The tents were the washed with Army Painter Green Tone or Soft Tone (for the Dark Sand tent) and the wooden poles and tent pegs painted Beige Brown.

A coat of matt varnish finished them off.

Now some of my Vikings have somewhere dry to sleep!

Suspension of Meetings

Following government announcements and the general the Committee has decided to suspend all society meetings for the time being. It is regrettable we have to do this but we must put everyone’s health above all other priorities.

The Committee also made the decision that Society will not be attending Salute with this year’s game. In the event of the show going ahead it is up to individual members if they still want to attend.

The Committee will continue to monitor the situation and update further as and when possible.

Wars of the Roses Army

At the start of my posts about doing a Wars of the Roses 15mm army I mentioned this was actually the first time in 35 years of Wargaming, that I have put together a complete historical army. Yes I’ve painted a force of 40 odd Dark Age warriors for Saga, but this was the first full army. While collecting and painting up this army I have been watching and listening to various Wars of the Roses documentaries and reading a number of books about the period.
It’s easy to see the appeal of doing historical gaming but I know when to stop over accuracy and just get on with a good game.

Earl of Salisbury’s Forces

For the game to come we will have two players per side, so I have the larger part of my army under the Earl of Sailsbury with a slightly smaller force under his son  Sir Thomas Neville.

Sir Thomas Neville’s Forces

On to the game, we are going to be using Sword and Spear. So stay tuned for the battle report that will hopefully be reporting a victory for the Yorkist cause.

Barrels of Fun

Andy has us over a barrel…

I picked up a few packs of 28mm scenery from Frontline Wargaming last year; they’ve been sitting around gathering dust, so during one of the recent washed out weekends I sat down for a painting session.
There were a few pin holes that needed filling and filing before the brushes came out.

Paints used were Vallejo (V) or Army Painter (AP) acrylics.

I undercoated the scenery matt black, and then painted them a variety of shades of brown (V). Once thoroughly dry they were given a wash of soft or dark tone (AP), depending on the shade of brown paint, then varnished with matt varnish (V).

25WW6 – Water Troughs x3

The water surface on the horse troughs were Painted Dark Sea Grey and given a couple of coats of gloss varnish (AP). The pump was painted Gunmetal (V) and given a dark tone (AP) wash.

25MR2 – Table benches and chairs

25MR3 – Brewery / Vintner (4 vats,2 tubs, bottling table)

The metal bands on the vats / barrels was painted Gunmetal (V); the bottles in the crate were painted Luftwaffe Camouflage Green (V), and then given a coat of gloss varnish mixed with AP green shade. The water in the tubs on the table was painted the same way as the horse trough water. The contents of the large tubs were painted Dark Sand (V) and washed with AP soft tone wash.

Finally a pair of ladders, I’m not sure of the manufacturer, but they were bought at Rochester Games and Models. 28mm figure for scale.

Wars of the Roses Archers

Finally got the last of my Wars of the Roses units completed. This time it was the archers. As with the other units I did buy a number of different brands but ended up just going with Essex miniatures and Peter Pig for the unit commanders. Like the other units I wanted to avoid the uniform two rows of miniatures on a base and so for the fist units of archers (the Retinue archers), I created a clear front line with a archers milling around on the second row.

Essex Retinue Archers

I wanted a mix of archer types and did a couple of militia archer units again using Essex miniatures.

Essex Miniatures Militia Archers

When painting the militia archers I realised that all but one of the miniatures was in a shooting stance, I could not therefore have a second line, but I wanted the militia archers to look undisciplined, so put them in irregular lines on the base to look more like a mob.

With the archers done so was I, but my would be opponent for the planned Wars of the Roses game mentioned having some artillery. Entering in to the arms race I also put a unit of guns together.

Essex Miniatures Wars of the Roses Artillery

I do have plans to do some other Wars of the Roses units like spearmen, some Welsh and other mercenaries. But this will do for the first battle.

A Small Start

Andy finds his painting mojo again…

First items finished this year are some reinforcements for my 6mm English Civil War forces.

We’ve played quite a few games of Sword and Spear recently, these are Ancient & Medieval rules, but on the publisher’s forum there were some discussions about adapting them for the Pike & Shot era, so I thought it might be interesting to try these out. To do this I needed to paint up some Commanded Shot, Firelocks and Camps.

My ECW forces are based for Polemos on 6cm wide by 3cm deep bases, either 24 foot (in varying proportions of pike and shot) or 9 or 10 horse to a base. I’ll be using these for the Sword and Spear try out, so needed to keep the same size bases.

The figures are from Heroics and Ros, painted with mostly Vallejo acrylics. Once painted they were stuck to the bases, labelled with unit description and flocked.

Commanded shot were detachments of musketeers taken from regiments of foot and attached to cavalry brigades to augment their firepower. Not always a successful idea, as the horse were slowed down by the foot, and if the horse routed or went off in pursuit the commanded shot were left on their own.

For the Commanded shot I decided to have 12 figures per base, painted as if they were from 2 or 3 different regiments (above).

Firelocks were foot equipped with early flintlock muskets rather than matchlocks and usually assigned to guard the train of artillery; lighted matches and gunpowder not being a good mix.
For the Firelocks I decided on 16 figures per base.

For the camps I bought some tents from Bacchus, and raided the spares box for various figures to add to the bases, some are from H&R and some from Irregular Miniatures. I built the camps on 6cm square bases.

I also had some carts and wagons, so did some baggage bases.

Finally some group shots, the Parliamentarian camp and troops.

And their Royalist opponents

Gael Force Norse

John Lambert gets his axe out.

I’d enjoyed using Norse Gaels in Saga Version 1 and was interested to know how they might fare under version 2 of the rules. I thought this faction was one that had changed the most under version 2 so decided on a new build based on the Footsore Irish and Viking ranges, taking advantage of the 3 for 2 offer they had running at the time. All figures painted using Artist’s acrylics.

Warlord – Hakon Maddadarson (The Hall Burner) – front pictured above

“Die bravely my slaves and I will take good care of your Dottirs!”

I mounted the Warlord on a piece of slate for a more imposing look. He has a rare and highly prized white Icelandic Gyr Falcon on his shield.

Daneaxe Heathguard

In version 1, there was an additional Saga ability bonus for taking Dane axes. This has gone in version 2 so only 1 point for this build.

Other Heathguard

I added 2 points of standard Heathguard. In version 1 Dane axe armed Warriors were the best option. In version 2 a powerful ability, Norse can only be used by Heathguard and Warlord so these appear to be a better option.

Gaed Gaedhil

These are fearsome mercenary warriors for which I used the Footsore Scots/Picts

Levy – Slaves

I used the Footsore Irish warrior range for these. Of limited use in Version 1 of Saga, they are a key part of my army in version 2. I painted 2 points of these.

The History of the Norse Gael Earls of Orkney is detailed in Orkneyinga Saga, an epic tale of bravery, treachery and Sainthood as rivals vie for the Earldom, raids in Russia, raids on Sicily, The First Crusade and an encounter with a Byzantine Dromon! How would the 28mm metal version fare on their debut?
The answer was rather well (see Jeremey’s battle report), despite misreading a SAGA ability and missing out on the chance to trap Andy’s Warlord, I really enjoyed the faction and the battleboard mechanics. Well worth a celebratory snifter or two of Highland Park ”Viking Honour”.

Wars of the Roses Cavlary

I finally got my Wars of the Roses Cavalry painted. Unlike the infantry I decided to stick to one manufacturer. When I started the project I got some old cavalry figures from a fellow club member and picked up some samples. What I found was a big difference in the scale of the cavalry. With mass infantry you can get away with differences in sizes, not everyone is the same size and so it doesn’t matter as much. But it was so obvious mixing different manufacturers for 6 mounted miniatures on a base.

15mm Wars of the Roses Cavalry from Peter Pig

I like the slightly chunky style of the Peter Pig miniatures and so was happy to go with them for my cavalry. I do like a bit of cavalry and so wanted to maximise my armies compliment. In Sword and Spear the army can only have two units of knights and so I also did a couple of units of Northern Boarder Horse. I’m really looking forward to getting these into battle.

Now all I have left to do is finish the archers and my Wars of the Roses army is complete. Unless I want more than two command units … hmmm